NEC Electra Elite IPK II Features And Specifications Manual page 498

Document Revision 1
84-11-05 G711 Jitter Buffer Type
Use this program to define G.711 Jitter Buffer setting –values are set in "ms".
(default: 60ms)
84-11-06 G711 Jitter Buffer Max
Use this program to define G.711 Jitter Buffer maximum accepted value –values are set in "ms".
(default: 120ms)
84-11-07 G729 Audio Frame
Use this program to define the G.729 audio Frame Size [1=10ms, 2=20ms, 3=30ms].
(default: 3=30ms)
84-11-08 G729 VAD Mode
Use this program to enable or disable Voice Activity Detection for G.729.
(default: 0:Disable)
84-11-09 G729 Jitter Buffer Min
Use this program to define G.711 Jitter Buffer minimum accepted value –values are set in "ms".
(default: 30ms)
84-11-10 G729 Jitter Buffer Type
Use this program to define G.729 Jitter Buffer setting –values are set in "ms".
(default: 60ms)
84-11-11 G729 Jitter Buffer Max
Use this program to define G.729 Jitter Buffer maximum accepted value –values are set in "ms".
(default: 120ms)
84-11-17 Jitter Buffer Mode
Use this program to define the Jitter Buffer mode – supported Static or Immediate.
(default: 2: Immediate)
84-11-18 Voice Activity Detection Threshold
Use this program to define the VAD Threshold – Values set in "db". Consult the Electra Elite IPK
II Programming Manual for Threshold scale to set acceptable values.
[default: 20= 0db(-30dbm)]
84-11-20 Echo Canceller Mode
Use this program to define to Enable or Disable Echo Canceller.
(default: 1:Enable)
84-11-22 Non-Linear Processing Echo Canceller Mode
Use this program to define to Enable or Disable NLP Echo Canceller Mode.
(default: 1:Enable)
84-11-22 Non-Linear Processing Echo Canceller Mode
Use this program to define to Enable or Disable NLP Echo Canceller Mode.
(default: 1:Enable)
2 - 476
Electra Elite IPK II
IP Station (MEGACO) - MG 16