NEC Electra Elite IPK II Features And Specifications Manual page 315

Hide thumbs Also See for Electra Elite IPK II:
Table of Contents

Advertisement

Electra Elite IPK II
22-11-11
DID Translation Number Conversion, Ring Group Transfer
Enable (1) or disable (0) each conversion table to follow the Ring Group programming defined in
Program 22-12-01 : DID Intercept Ring Group. If Program 22-11-05 : DID Translation Number
Conversion, Transfer Destination Number 1 and Program 22-11-06 : DID Translation Number
Conversion, Transfer Destination Number 2 are set, the priority of transferring will be in this
order: Program 22-11-05 then Program 22-11-06 then if Program 22-11-11 is enabled, Program
22-12-01.
22-12-01
DID Intercept Ring Group
For each DID Translation Table, program the DID Intercept destination. The destination can be a
Ring Group, In-Skin/External Voice Mail, or Centralized Voice Mail. This program is used when
there is no destination programmed in Program 22-11-05. It is unrelated to Program 22-11-06
and 22-11-07.
Ring Groups:
1~100
102 = In-Skin/External Voice Mail
103 = Centralized Voice Mail
22-13-01
DID Trunk Group to Translation Table Assignment
Assign the DID trunk groups to translation tables. If all the DID trunks use the same type of DID
service, you may have only one DID trunk group and one DID Translation Table (with many
entries).
Trunk Groups: 1~100
25-01-01
VRS/DISA Line Basic Data Setup - VRS/DISA Dial-In Mode
Determine whether the system should use option 0 (Extension number/Service code specify) or
option 1 (Use dial conversion table) for calls.
25-01-03
VRS/DISA Line Basic Data Setup - VRS/DISA Transfer Alarm
Determine whether the system should use option 0 (Normal) or option 1 (Alarm) for calls.
25-02-01
VRS/DISA VRS Message
For each trunk port and each night mode, select the message source (0 = No Message,
1 = VRS, 2 = ACI, 3 =S LT), assign the VRS message number to be used as the Automated
Attendant Message for each trunk, which is assigned as VRS/DISA (with VRS = 01~48 [VRS
message number], with ACI = 1~4 or 01~16 [ACI group number], with SLT = 1~8 or 01~64
[Department Group number]).
Trunk Ports:
001~200
Night Time Service Modes:
1~8
Direct Inward Dialing (DID)
Document Revision 1
2 - 293

Advertisement

Table of Contents
loading

Table of Contents