NEC Electra Elite IPK II Features And Specifications Manual page 138

Document Revision 1
Trunk-to-Trunk Forwarding - DID (3) Trunk Forwarding by Department Groups
programming)

Refer to Department Calling for additional Department Group programming.
11-07-01 : Department Group Pilot Numbers
Assign pilot numbers to the Extension (Department) Groups you set up in Program 16-02.
11-11-25 Service Code Setup (for Setup/Entry Operation) - Setting the Automatic Trunk Forwarding
for Department Groups
Customize the service code to be used to set the Automatic Trunk Forwarding feature for a
Department Group (default: 602).
11-11-26 Service Code Setup (for System Administrator) - Cancel the Automatic Trunk Forwarding
for Department Groups
Customize the service code to be used to cancel the Automatic Trunk Forwarding feature for a
Department Group (default: 603).
11-11-27 Service Code Setup (for System Administrator) - Automatic Trunk Forwarding Destination
for Department Groups
Customize the service code to be used to set the destination for the Automatic Trunk Forwarding
feature for a Department Group (default: 604).
13-01-01 Abbreviated Dialing Function Setup - Abbreviated Dialing Auto Outgoing Call Mode
Determine if dialing an Abbreviated Dialing number will dial an outside number (seizing a trunk
as assigned in Program 13-05) or an Intercom number (0 = Trunk Dialing Mode, 1 = Extension
Dialing Mode).
13-04-01 Abbreviated Dialing Number and Name
Enter the Common and Group Abbreviated Dialing numbers and names which are to be used for
Trunk-to-Trunk Forwarding.
14-01-04 Basic Trunk Data Setup - Transmit Gain Level for Conference and Transfer Calls
CODEC gain set at 0 dB [14-01-04 = 32 (CODEC Gain Type 2)] can be used to set the transmit
CODEC gain type for multiline Conference or transferred calls.
14-01-05 Basic Trunk Data Setup - Receive Gain Level for Conference and Transfer Calls
CODEC gain set at 0 dB [14-01-04 = 32 (CODEC Gain Type 2)] can be used to set the transmit
CODEC gain type for multiline Conference or transferred calls.
14-06 Trunk Group Routing
Set up an outbound routing table for the trunk groups you assign in Program 14-05. When users
dial 9, the system routes their calls in the order (priority) you specify.
15-07-01 Programming Function Keys
Assign an Automatic Forwarding at Department Group key (58) or a Delayed Forwarding at
Department Group key (59) for an extension user.
16-02-01 Department Group Assignment for Extensions
Assign extensions to Department Groups (1~64) and set the priority assignment.
2 - 116
Electra Elite IPK II
(in addition to above
Call Forwarding, Off-Premise