NEC Electra Elite IPK II Features And Specifications Manual page 454

Document Revision 1
Related Features
Handsfree and Monitor
Microphone Cutoff
Programming
11-11-15 Service Code Setup (for Setup/Entry Operation) - Enable Handsfree Incoming Intercom
Calls
If required, change the service code used for setting an extension to voice announce for
incoming ICM calls (default: 721).
11-11-16 Service Code Setup (for Setup/Entry Operation) - Force Ringing of Incoming Intercom
Calls
If required, change the service code used for setting an extension to forced ringing for incoming
ICM calls (default: 723).
11-12-06 Service Code Setup (for Service Access) - Switching of Voice Call and Signal Call
If required, change the service code used for toggling an outgoing ICM call between a voice call
and signal call (default: 712).
15-02-16 Multi-Line Telephone Basic Data Setup - Handsfree Operation
Enable (1) or disable (0) an extensions ability to use the speakerphone on outside calls. Users
can hear the conversation, but cannot respond handsfree.
20-02-12 System Options for Multiline Telephones - Forced Intercom Ringing
Enable (1) or disable (0) Forced Intercom Ringing. If disabled (0), Intercom calls
voice-announce.
20-06-01 Class of Service for Extensions
Assign a Class Of Service (1~15) to an extension.
20-08-10 Class of Service Options (Outgoing Call Service) - Switching from Handsfree Answerback
to Forced Intercom Ringing
In an extension's Class of Service, enable (1) or disable (0) an extension's ability to toggle
between Handsfree Answerback and Forced Intercom Ringing for outgoing Intercom calls (dial 1
or Service Code 712).
20-09-05 Class of Service Options (Incoming Call Service) - Setting Handsfree Answerback/Forced
Intercom Ringing
In an extension's Class of Service, enable (1) or disable (0) an extension's ability to set
Handsfree Answerback (Service Code 721) and Forced Intercom Ringing (Service Code 723)
for incoming Intercom calls.
2 - 432 Handsfree Answerback/Forced Intercom Ringing
Electra Elite IPK II