NEC Electra Elite IPK II Features And Specifications Manual page 676

Document Revision 1
r Users answer incoming calls on PBX trunks just like other trunks. All of the relevant access
and Ring Group programming applies. Refer to these features for more details.
Except for dialing the PBX access code, users place calls on PBX trunks just like other
r
trunks. All of the relevant access programming applies. Refer to the Central Office Calls
Placing feature for more details.
You can have DILs route from the connected PBX. Users can access these trunks for
r
outgoing PBX calls. All PBX Compatibility restrictions and programming apply.
Flash may allow access to certain PBX features - like Transfer. Make sure you program
r
Flash for compatibility with the connected PBX.
r The system does not provide automatic Pulse to Tone Conversion after outdialing the PBX
trunk access code.
r You can program incoming DISA trunks to be outgoing PBX trunks. All PBX Compatibility
restrictions and programming apply.
PBX trunks can follow normal system Toll Restriction.
r
r Users can get outbound access to PBX trunks through Trunk Groups and/or Trunk Group
Routing. All PBX Compatibility restrictions and programming apply.
If the system routes a call to a PBX trunk, it does not automatically insert the PBX access
r
code. It outdials the call just as the user dialed it.
Default Setting
Disabled
System Availability
Terminals
All Terminals
Required Component(s)
None
2 - 654
Electra Elite IPK II
PBX Compatibility