NEC Electra Elite IPK II Features And Specifications Manual page 938

Document Revision 1
For Either Method:
22-04-01 Incoming Extension Ring Group Assignment
To enable Voice Mail Overflow, assign selected extensions to a Ring Group that will ring for
unanswered DILs to Voice Mail ports. In Program 22-06, enter 1 to enable overflow ringing.
22-08-01 DIL/IRG No Answer Destination
For Voice Mail Overflow, enter the Ring Group that unanswered DILs to Voice Mail will ring after
the DIL Call Waiting time (Program 22-01-04).
24-02-03 System Options for Transfer - Delayed Call Forwarding Time
Set the interval a transferred call waits at a forwarded extension before routing to the called
extension's mailbox.
40-03-01 Message Recording Setup - Voice Mail Recording Time
Set the amount of time the voice mail can record a message (1~10 minutes).
40-03-02 Message Recording Setup - Guidance Message
Select a guidance message in case recording is not allowed.
0 = Fixed
1 = Answer Message Mailbox
40-03-03 Message Recording Setup - Response Message
Determine if a response message is automatically sent out when busy.
0 = Disable
1 = Enable
40-07-01 Voice Prompt Language Assignment for Voice Mail
Specify the language to be used for the voice mail (default = 1, English). Although the system
allows this option to be changed in programming, the language will only change if the DSPII-U10
Unit has the firmware which provides the newly selected language.
45-01-01 Voice Mail Integration Options, Voice Mail Department Group Number
Assign which Extension (Department) Group number is to be assigned as the voice mail group.
An entry of '0' means there is no voice mail installed.
Department Groups: 0, 1~64
45-01-02 Voice Mail Integration Options, Voice Mail Master Name
Enter the Voice Mail master name up to 12 characters.
2 - 916
Electra Elite IPK II
Voice Mail Integration (Analog)