NEC Electra Elite IPK II Features And Specifications Manual page 141

Electra Elite IPK II
4. Dial 0 (Cancel).
If Internal and External are set both will be canceled.

Your DND or Call Forwarding (Device) Programmable Function Key flashes.

Off-Premise Call Forwarding for Door Boxes"

These operations are performed at the Door Box Ringing Extension only.
To activate Call Forwarding Off-Premise for a Door Box:

This option only works for ISDN PRI or BRI Trunks.
1. At the multiline terminal, press the Speaker key + Dial SC 722.
- OR -
At multiline terminal only, press Call Forward (Device) key (PGM 15-07-01 or SC 751, code 54).
- OR -
At the single line telephone, lift the handset + Dial 722.
2. Dial the Door Box number (1~4).
3. Dial the Abbreviated Dialing number where the calls should be forwarded.
4. Press the Speaker key (or hang up at the single line telephone) to hang up.
To cancel Call Forwarding Off-Premise for a Door Box:
1. At the Multiline Terminal, press the Speaker Key + Dial SC 722.
- OR -
At a multiline terminal only, press Call Forward (Device) key (PGM 15-07-01 or SC 751, code 54).
- OR -
At the single line telephone, lift the handset + Dial 722.
2. Dial 0 (Cancel).
Trunk-to-Trunk Forwarding
Method 1
Set the Destination and Forward the Line:
1. Lift the handset.
2. Dial 735.
3. Dial trunk port number (001~200) to be defined.
4. Select the time mode (1~8) to be defined.
5. Enter the telephone number, which is the destination of the forwarded trunk.
Call Forwarding, Off-Premise
Document Revision 1
2 - 119