NEC Electra Elite IPK II Features And Specifications Manual page 341

Electra Elite IPK II
30-03-01 DSS Console Key Assignment
Customize DSS Console keys to function as DSS keys, Service Code keys, Programmable
Function Keys, and One-Touch Calling keys. The key (when defined as a DSS/One-Touch key
[code 01] can have any function up to four digits long (e.g., extension number or Service Code).
The function information (such as extension number or Service Code) would then be entered as
the additional data.
30-05-02 DSS Console Lamp Table
through If required, use this program to customize the system's DSS Console flash rates. This table also
30-05-21 affects DSS/Hotline key lamping for multiline terminals.
Operation
Calling an extension from your DSS Console:
1. Press the DSS Console key.
 If the call voice-announces, you can make it ring by dialing 1.
If you do not have Handsfree, you must lift the handset to speak.

When the DSS key is...
On
Off
Flashing Fast
Answering a trunk call from your DSS Console:
1. Press flashing DSS Console key assigned to trunk.
If you do not have Handsfree, you must lift the handset to speak.

Transferring a call using your DSS Console:
1. Place or answer the call.
2. Press the Transfer key to transfer the call.
3. Press the DSS key for the extension that will receive the transfer.
4. (Optional) Announce the call.
If called party does not want the call, press the flashing line key to retrieve it.

Direct Station Selection (DSS) Console
Extension Busy Lamp Field
The assigned extension is...
Busy on a call
Idle
In Do Not Disturb
Document Revision 1
2 - 319