NEC Electra Elite IPK II Features And Specifications Manual page 727

Electra Elite IPK II
Programming
15-07-01 Programmable Function Keys
Assign a function key for Reverse Voice Over (code 47 + destination extension).
Assign a function key for Voice Over to the destination extension (code 48). This will allow the
user at the destination to switch between calls if they where busy when the Reverse Voice Over
was initiated.
20-02-03 System Options for Multiline Telephones - BLF Control
Define whether BLF will light when a station is idle (0) or busy (1).
20-13-06 Define whether a busy extension Manually (0) or Automatically (1) receives off hook
signals.
20-06-01 Class of Service for Extensions
Assign a Class of Service (COS) to each extension (1~15).
Operation
When on a call:
To place a Reverse Voice Over call:
1. Press your Reverse Voice Over key (PGM 15-07 or SC 751: 47 + destination extension).
Your Reverse Voice Over key lights steadily (green) and you can talk with the programmed Reverse Voice Over

destination.
To receive a Reverse Voice Over Call while busy:
1. 1. Press the Voice Over key (PGM 15-07 or SC 751: 48).
 The voice over key allows you to switch back and forth between the initial call and the Reverse Voice Over Call.
To return to your initial caller:
1. Press the Reverse Voice Over key again.
 If the co-worker you call hangs up, you return to the initial call automatically.
When the telephone is idle:
To place a call to your Reverse Voice Over destination:
1. Press your Reverse Voice Over key (PGM 15-07 or SC 751: 47 + destination extension).
You can optionally Lift the handset after this step for privacy.

Reverse Voice Over
Document Revision 1
2 - 705