NEC Electra Elite IPK II Features And Specifications Manual page 783

Electra Elite IPK II
20-08-03 COS Options (Outgoing Call Service) - System Speed Dialing
In an extension's COS, enable (1) or disable (0) System Speed Dialing.
20-08-04 COS Options (Outgoing Call Service) - Group Speed Dialing
In an extension's Class of Service, enable (1) or disable (0) Group Speed Dialing.
30-03-01 DSS Console Key Assignment
For DSS Console Chaining, assign an Speed Dialing Service Code (or ) plus a two-digit bin
number to a DSS Console key.
80-03-01 DTMF Tone Receiver Setup
80-04-01 Call Progress Tone Detector Setup
If required, modify the criteria for dial tone detection and call progress tone detection for
outgoing Speed Dialing calls.
81-01-16 ATRU-LS Initial Data Setup - Pause Time
If Speed Dialing numbers include a pause, the system uses this timer to determine the length of
the pause. This timer is enabled/disabled in 14-02-06.
Operation
To store an Speed Dialing number (display telephones only):
1. Press the Speaker key.
2. Dial 753 (for system) or 754 (for group).
3. Dial system or group storage code.
Initially, there are 1000 System Speed Dialing codes. There are Group Speed Dialing codes only if you define

them in programming.
4. Dial telephone number you want to store (up to 24 digits).
Valid entries are 0~9, # and

5. Press Hold.
6. Enter the name associated with the Speed Dialing number.
Speed Dial - System/Group/Station
. To enter a pause, press Transfer. To store a Flash, press Recall.
,
Document Revision 1
2 - 761