NEC Electra Elite IPK II Features And Specifications Manual page 243

Electra Elite IPK II
Programming
11-11-34 Service Code Setup (for Setup/Entry Operation) - Temporary Toll Restriction Override
If required, change the service code (775) for Temporary Toll Restriction Override.
11-11-36 Service Code Setup (for Setup/Entry Operation) - Walking Toll Restriction
If required, change the service code (663) for Toll Restriction Override.
20-08-06 Class of Service Options (Outgoing Call Service) - Toll Restriction Override
In an extension's Class of Service, enable (1) or disable (0) the ability to use Temporary Toll
Restriction Override.
21-01-07 System Options for Outgoing Calls - Toll Restriction Override Time
Set the Toll Restriction Override Time (0~64800 seconds). After dialing the Toll Restriction
Override codes, the system removes Toll Restriction for this interval.
21-07-01 Toll Restriction Override Password Setup
Assign Toll Restriction Override codes to extensions. Each code must be 4 digits long, using any
combination of 0~9, # and
can share the same override code.
21-14-01 Walking Toll Restriction Password Setup - User ID
Enter the Walking Toll Restriction Override User ID codes (6 digits) into tables. Up to 500
different override codes can be entered.
21-14-02 Walking Toll Restriction Password Setup - Walking Toll Restriction Class Number
Enter the Walking Toll Restriction Class of Service (1~15) to be used for each table number
assigned in 21-14-01.
35-02-01
through
35-02-18 SMDR Output Options
Assign the output condition for the printer or PC. If the data is set to "1" (output), the symbol of
the call will print as "POTA" and the password table number will be printed as "W/@@@" (@@
equals the 3 digit table number) in the Account Code area.
Code Restriction Override
∗
. Each extension can have a separate code, or many extensions
Document Revision 1
2 - 221