NEC Electra Elite IPK II Features And Specifications Manual page 527

Electra Elite IPK II
Single Line Telephone
1. Hookflash.
2. Dial 654.
The system automatically reconnects you to your call.

To stop recording, hookflash twice. You can restart and stop recording as required.

Personal Answering Machine Emulation (Multiline Terminal Only)
To enable or cancel Personal Answering Machine Emulation:
1. 1. Press the Speaker key (or lift the handset at the single line telephone) and choose from the
following dial access codes:
741 = Call Forward - Immediate
742 = Call Forward - Busy
743 = Call Forward - No Answer
744 = Call Forward - Busy/No Answer
745 = Call Forward - Both Ring
746 = Call Forwarding - Follow-Me
2. Dial the Voice Mail master number.
3. Press the Speaker key to hang up (or hang up handset at the single line telephone).
When Personal Answering Machine Emulation broadcasts your caller's message, you can:
Your telephone must be idle (not on a call).
1. Do nothing.
The message is automatically being recorded in your mailbox. The broadcast stops when your caller hangs up.

- OR -
1. Lift the handset to intercept the call.
You connect to the caller. The system records the first part of the message in your mailbox. The line key changes

from red to green.
- OR -
Press the Speaker key to cut off the message broadcast and send the call to your mailbox.
Voice Mail records the entire message in your mailbox.

IPK II In-Mail
Document Revision 1
2 - 505