Electra Elite IPK II
Operation
To enable the headset:
1.
Plug in the headset into the headset jack on the bottom of the telephone.
2.
Program a Headset key (PGM 15-07 or SC 751: 05).
You hear a confirmation beep.
To use the headset:
The Headset key lights when you're on a call. To disconnect, press the Headset key again.
You can still use the handset for calls or respond to voice-announced Intercom calls with the headset
plugged in. The headset only activates when the Headset key is pressed.
Answer a ringing call by pressing the Headset key.
J
- OR -
Press the Headset key and then a line key or press the Speaker key then 9 to make a outgoing
J
call.
- OR -
Press the Headset key to get intercom dial tone.
J
- OR -
If on a call, press the Headset key to hang up.
J
Headset Operation
Document Revision 1
2 - 437