NEC Electra Elite IPK II Features And Specifications Manual page 189

Hide thumbs Also See for Electra Elite IPK II:
Table of Contents

Advertisement

Electra Elite IPK II
14-07-01
Trunk Access Map Setup
Set up the Trunk Access Maps. This sets the access options for trunks. Ring Group
programming overrides Access Map programming.
Trunk Access Maps: 1~200
15-01-05
Basic Extension Data Setup - Restriction for Outgoing Disable on Incoming Line
Enable (1) or disable (0) supervised dial detection for an extension.
15-02-01
Multiline Telephone Basic Data Setup
Select the language, which should be used on a telephone display:
0 = Japanese
1 = English
2 = German
3 = French
4 = Italian
15-02-02
Multiline Telephone Basic Data Setup - Trunk Ring Tone
Trunks ring extensions according to the Ring Tone Range selected in 22-03-01 and the settings
made with either Service Code 720 or Program 15-02-02.
15-02-22
Multiline Telephone Basic Data Setup, Multiple Incoming From Intercom and Trunk
When this option is set to '0' (disabled), incoming calls to an extension will indicate on any
Hotline keys for that extension as solid (busy). When this option is set to '1' (enabled), lamping
is determined by the setting of Program 22-01-01 Incoming Call Priority. If set to trunk priority
(1), the Hotline key will lamp solid when a trunk call rings in. If set to intercom priority (0), the
Hotline key will not lamp for incoming trunk calls, but will lamp solid for intercom calls.
15-03-03
Single Line Telephone Basic Data Setup - Terminal Type
Enter 1 for this option to allow a single line port to receive DTMF tones after the initial call setup.
Enter 0 to have the port ignore DTMF tones after the initial call setup. For Voice Mail, always
enter 1 (e.g., receive DTMF tones).
15-06-01
Trunk Access Map for Extensions
Assign Trunk Access Maps to extensions.
Trunk Access Maps: 1~200
15-07-01
Programming Function Keys
To have outside calls ring specific keys, assign trunks to line keys (code
also program function keys as trunk group (
Use a Call Redirect key (49) to allow a user to transfer a call to another extension or voice mail
without answering the call.
Trunks: 1~100
Central Office Calls, Answering
5 = Spanish
6 = Dutch
7 = Portuguese
8 = Norwegian
9 = Danish
02) or Call Appearance (CAP) Keys (
Document Revision 1
01 + trunk). You can
08 + bin).
2 - 167

Advertisement

Table of Contents
loading

Table of Contents