Document Revision 1
IPK II CPU
PVA or IAD
HUB Card
(Switching Hub)
To connect a telephone to a LAN connection, the system allows the use of an Electra Elite IPK II digital
IP 16-button multiline terminal (referred to as Electra Elite IPK II IPhone), an Electra Elite IPK II digital
multiline terminal with an IP Adapter installed.
If connecting a LAN to a WAN (wide area network), follow the instructions included with the ADSL
modem or gateway device.
IP Address
Equipment/devices used in the Electra Elite IPK II LAN setup must have an IP address assignment. An
IP address assigns a unique address for each device. There are two types of IP addresses: Private and
Global. A Private IP address is not accessible through the internet - a Global IP address can be
accessed through the internet.
With a Private IP address, with equipment that does not access the internet directly, addresses can be
assigned to the equipment within Class A, B or C by assigning a number within the class's range of
numbers.
Class
A
B
C
2 - 932
10Base - T/100 Base-T
(100Base-TX is
recommended)
Allowed IP Address
10.0.0.0 ---10.22.255.255
172.16.0.0 --- 172.31.255.255
192.168.0.0 --- 192.168.255.255
Switch
Recommended
Environment
Large Scale Network
Mid Scale Network
Small Scale Network
Voice Over Internet Protocol (VoIP)
Electra Elite IPK II
IPK II CPU
IPK II CPU