NEC Electra Elite IPK II Features And Specifications Manual page 376
Hide thumbs
Also See for Electra Elite IPK II:
- User manual (1190 pages) ,
- System hardware manual (642 pages) ,
- Programming manual (617 pages)
Table of Contents
Advertisement
Document Revision 1
3.
Or press Desk to select Multiline Terminal.
Switching must be accomplished while both terminals are idle.
A call in progress cannot be switched. When tried, it is dropped.
Switching held calls is not recommended because LED indications are not provided.
The Power LED and the applicable position LED are on to indicate selection.
To switch from Desk to Cordless using Redial Key:
1.
Verify that the Base Unit is in Desk mode.
2.
Remove battery.
J
3.
Press and hold
4.
Install the battery while holding these keys.
5.
After the handset beeps one time, release the keys.
6.
The handset is in Setup mode.
7.
Press HOLD to display the current mode (Digital/Redial).
8.
Press F2 and then HOLD.
9.
The handset displays Digital (F8), and changes the REDIAL key program to Desk/Cordless
Softkey Switching mode.
10.
Press TALK to restore standby mode.
11.
Press REDIAL to test this feature.
12.
The Base Unit automatically changes from Desk to Cordless.
This is a one time operation, but one of the F1~F4 keys can be programmed for the redial function.
2 - 354
Cordless II Base Unit Controls
L
and
on the handset.
Electra Elite IPK II
term
D
Cordless II Terminal
Advertisement
Table of Contents
