NEC Electra Elite IPK II Features And Specifications Manual page 801

Electra Elite IPK II
r SMDR requires a connection to the CPUII via a COM port or LAN connection. A USB
connection from the Electra Elite IPK II CPUII requires a USB driver.
The system can also use a connection to the system via a CTA/CTU adapter (the CTU
adapter also requires a USB driver). Once you designate a CTA or CTU for SMDR, you
cannot use that extension for placing and answering other data calls. SMDR and the Traffic
Reports should not use the same CTA/CTU.
r If no answer is received, "NO ANSWER" is displayed regardless of the system programing
for the Caller ID display option.
The setting in Program 35-02-18 works regardless of the entry in Program 35-02-15 or
r
35-02-17.
r When Program 35-02-18 is set to "1", the first and second lines are sometimes separated.
When the buffer is full, the overflowed data may not be shown.
r The special characters used in the Electra Elite IPK II system cannot be output to the
SMDR - they are converted to "_".
To use the PBX Call Reporting option, program system for behind PBX operation.
r
r Traffic Management Reports and SMDR should not use the same CTA/CTU port.
r SMDR can be output to eight simultaneous devices. 1 SMDR Port can be set to the KSU
COM port and 1 SMDR Port can be set for to the LAN port. The remaining six outputs can
be set to different CTA/CTU adapters.
Default Setting
Disabled
System Availability
Terminals
All Stations
Required Component(s)
Software License
Station Message Detail Recording
Document Revision 1
2 - 779