NEC Electra Elite IPK II Features And Specifications Manual page 40

Document Revision 1
Verified Account Codes
J
With Verified Account Codes, the system compares the Account Code the user dials to a list of up
to 2000 pre-programmed codes. If the Account Code is in the list, the call goes through. If the code
dialed is not in the list, the system prevents the call. Verified Account Codes can be from 3~16
digits long using the characters 0~9 and #. During programming, you can use "wild cards" to
streamline entering codes into system memory. For example, the entry 123@ lets users dial
Verified Account Codes from 1230 through 1239.
Operator Notification
To prevent Account Code abuse, the system can notify the operator each time an Account Code
violation occurs (PGM: 20-13-20). This can happen if the user fails to enter an Account Code (if Forced)
or enters a Verified Account Code that is not in the list. The notification is an automatic Intercom call to
the attendant and a "RESTRICT" message in the operator's display. (If the attendant fails to enter a
valid Account Code, the system drops the call.)
Account Codes for Incoming Calls
The system can control the ability of extension users to enter Account Codes for incoming calls. When
this option is enabled, a user can dial * while on an incoming call, enter an Account Code, and then dial
* to return to their caller. If the option is disabled, any digits the user dials after answering an incoming
call outdial on the connected trunk.
Hiding Account Codes
Account Codes can be optionally hidden from a telephone's display. This would prevent, for example, an
unauthorized co-worker from obtaining a Verified Account Code by watching the display and making
note of the digits that dial out. When hidden, the Account Code digits show as the character "
telephone display.
Account Code Capacity
Account Codes print along with the other call data on the SMDR record after the call completes. Account
Codes can be 1~16 digits in length using 0~9 and #. Verified Account Codes can be from 3~16 digits
long.
Redialed Numbers Do Not Contain Account Codes
When using the Last Number Redial, Save or Repeat Dial features, the system will not retain Account
Code information. Any number redialed with these features, the user will need to reenter an Account
Code.
∗

If a user enters 12345
the number as 203 926 5400
2 - 18
∗ ∗ ∗
203 926 5400 67890
∗ ∗ ∗
67890 . The 67890
, if the Last Number Redial feature is used, the system dials
∗
is not treated as an Account Code.
Account Code – Forced/Verified/Unverified
Electra Elite IPK II
" on the
,