NEC Electra Elite IPK II Features And Specifications Manual page 480

Document Revision 1
20-08-10 Class of Service Options (Outgoing Call Service) - Switching from Handsfree Answerback
to Forced Intercom Ringing
In an extension's Class of Service, enable (1) or disable (0) an extension's ability to toggle
between Handsfree Answerback and Forced Intercom Ringing for outgoing Intercom calls (dial
1).
20-09-05 Class of Service Options (Incoming Call Service) - Setting Handsfree Answerback/Forced
Intercom Ringing
In an extension's Class of Service, enable (1) or disable (0) an extension's ability to set
Handsfree Answerback (Service Code 721) and Forced Intercom Ringing (Service Code 723)
for incoming Intercom calls.
20-13-06 Class of Service Options (Supplementary Service) - Automatic off-hook Signaling
In an extension's Class of Service, enable (1) or disable (0) the extension's ability to
automatically send off-hook Signals while busy on a handset call. Setting this option to "0" will
prevent Intercom calls from providing Off-Hook Signaling - instead the caller will hear a busy
signal.
80-01-01 Service Tone Setup - Tone 28, Speaker Monitor Tone
This tone changes the tone the originator of an ICM call hears. (The tone cannot be changed for
what is heard by the user when receiving an ICM call.)
Operation
To place an Intercom call:
1. At multiline terminal, press the Speaker key.
- OR -
At single line telephone, lift the handset.
2. Dial extension number (or 0 for your operator).
Your call may voice-announce or ring the called extension. Dial 1 to change the way your call alerts the called

extension.
If the extension you call is busy or does not answer, you can dial another extension without hanging up.

To answer an Intercom call:
1. If you hear two beeps, speak toward telephone.
Your telephone picks up your voice.

- OR -
If your telephone rings, lift the handset.
2 - 458
Electra Elite IPK II
Intercom