Private Line - NEC Electra Elite IPK II Features And Specifications Manual

Electra Elite IPK II
Description
A Private Line is a trunk reserved for a multiline terminal for placing and answering calls. A user with a
Private Line always knows when important calls are for them. Additionally, the user has their own trunk
for placing calls that is not available to others in the system.
Conditions
r Incoming Only - The multiline terminal has a Private Line only for incoming calls. The user
cannot place calls on the Private Line.
r Outgoing Only - The multiline terminal has a Private Line only for outgoing calls. The
Private Line does not ring for incoming calls.
Both Ways - The multiline terminal has a Private Line for both incoming and outgoing calls.
r
r Private Lines do not follow Call Forwarding if not Direct Inward Line (DIL).
r Other programmed options for outgoing calls also affect a Prime Line.
Calls to extensions with DND active do not follow Call Forwarding programming. Direct
r
Inward Line (DIL) calls will ring an idle Department Group member, then follow 22-08
programming then 22-05 programming.
r An extension user can have Line Preference options applied to their Private Line.
r A Private Line can also be a Prime Line.
r You should always program a line key for each Private Line.
Private Lines are available on single line telephones.
r
r Private Lines follow normal Toll Restriction.
r An extension user can Transfer their Private Line. Since other users have hold access, the
destination can answer the transferred Private Line and place it on Hold.
r NEC does not recommend assigning Ringdown to a private line.
Default Setting
Disabled

Private Line

Document Revision 1
Private Line
2 - 675