NEC Electra Elite IPK II Features And Specifications Manual page 110

Document Revision 1
r All Flexible Line keys on a multiline terminal can be assigned as CAP keys in System
Programming.
A conference call involving two outside lines cannot reside on one Call Appearance key.
r
r For Call Appearance (CAP) Keys, trunks must be assigned to trunk group 1 or higher
(Program 14-05-01). Trunk Group 0 means KF (Key Function) mode.
CAP Keys can be programmed from 0001~9999. 0000 assigns the next available CAP
r
Key.
r Trunk Group (
can not be programmed on a DSS Console as the system does not allow entry of the
additional data required.
If you have a trunk line key and Call Appearance (CAP) Key for the same trunk, the line key
r
has priority. An incoming call rings the trunk line key and when answered, the trunk line
keys lights, not the CAP Key. When you access the trunk for an outgoing call, the Trunk
line key lights, not the Call Appearance (CAP) Key.
Default Setting
Disabled
System Availability
Terminals
All Multiline Terminals
Required Component(s)
Not applicable
Related Features
Automatic Route Selection (ARS)
Central Office Calls, Answering
Central Office Calls, Placing
Call Arrival Keys (CAR)
2 - 88
0 2), Virtual Extension (
,
0 3) and Call Appearance (CAP) Key (
,
Electra Elite IPK II
0 8), codes
,
Call Appearance (CAP) Keys