NEC Electra Elite IPK II Features And Specifications Manual page 581

Electra Elite IPK II
14-07-01 Trunk Access Map Setup
For Outgoing Line Preference and Auto-Answer of Non-Ringing Lines, set up the Trunk Access
Maps.
Trunk Access Maps: 1~200
15-01-02 Basic Extension Data Setup - Outgoing Trunk Line Preference
Enable (1) or disable (0) Outgoing Trunk Line Preference for extensions.
15-02-10 Multiline Telephone Basic Data Setup - Ringing Line Preference for Trunk Calls
Enable Idle (0) or Ringing (1) Line Preference for trunk calls. See the table below for interaction.
Program 22-01-01 sets Intercom (0) or trunk (1) call priority.
15-06-01 Trunk Access Map for Extensions
For Outgoing Line Preference and Auto-Answer of Non-Ringing Lines, assign trunk Access
Maps to extensions.
Trunk Access Maps: 1~200
20-10-07 Class of Service Options (Answer Service) - Automatic Answer of Universal Calls
Enable (1) or disable (0) an extension's ability to use Universal Auto Answer for non-ringing
lines.
22-01-01 System Options for Incoming Calls - Incoming Call Priority
Determine if ringing Intercom calls (0) or ringing trunk calls (1) should have answer priority. See
the table below for interaction.
22-04-01 Incoming Extension Ring Group Assignment
Assign extensions to ring groups. Auto-Answer for Non-Ringing Lines only works for trunks that
do not ring an extension.
Ring Groups:
1~100
102 = In-Skin/External Voice Mail
103 = Centralized Voice Mail
22-05-01 Incoming Trunk Ring Group Assignment
Assign trunks to ring groups. Auto-Answer for Non-Ringing Lines only works for trunks that do
not ring an extension.
Ring Groups:
1~100
102 = In-Skin/External Voice Mail
103 = Centralized Voice Mail
Line Preference
Document Revision 1
2 - 559