NEC Electra Elite IPK II Features And Specifications Manual page 494

Document Revision 1
System Availability
Terminals
ITH-16D-2/3 Multiline Terminal
- OR -
ITH-8D-2/3 Multiline Terminal
- OR -
Any IPK Multiline Terminal with IP-R (IPK) Unit installed.
- OR -
IPK Soft Phone
Required Component(s)
PVA( )-U( ) ETUwith IP Station (MEGACO) application loaded.
AC-R UNIT (AC Adapter) (When in-line power is used, Power over Ethernet (POE), is not
provided.)
Related Features
None
Programming
VoIP Settings:
When the PVA( )-U( ) ETU is first purchased it has a factory default package installed. You will have to
load the MG Application for the Elite IPK II KSU to recognize the VoIP MG16 ETU. [Reference the
PVA( )-U( ) ETUs Firmware upgrade installation procedure].
84-05-01 VOIP IP Address Setup
Use this program to define the IP Address of the VoIP Application supported (MG16, CCISoIP).
(default: Slot 1: 172.16.0.20)
2 - 472
Electra Elite IPK II
IP Station (MEGACO) - MG 16