NEC Electra Elite IPK II Features And Specifications Manual page 934

Document Revision 1
As the Voice Mail Queue follows Department Hunting programming, the queue can hold a maximum of
10 calls. If the queue is full or if the voice mail ports are not assigned to a Department Group, the calls
will be handled as though there were no voice mail queuing feature enabled. The calls will either access
voice mail if a port is available or they will receive a busy signal.
The Voice Mail Queuing feature does not work with the Conversation Record feature.
MSG Key will Operate as Voice Mail Key
The system enhances a telephone's MSG key function when connected to a system which has voice
mail installed. When an extension receives a voice mail, the MSG key can be used to check the number
of messages in voice mail, as well as call the voice mail to listen to the messages. If there is no Voice
Mail Programmable Function Key defined (Program 15-07-01, code 77), the telephone's Message
Waiting LED will flash to indicate new messages.
This option is not available with a networked voice mail - the voice mail must be local.
Conditions
The periodic reminder message requires a DSP daughter board for Voice Response
r
System (VRS).
r Ring Group calls do not follow extension call forwarding to voice mail.
Analog ports on the CPU do not support Message Waiting lamping.
r
Default Setting
Disabled
System Availability
Terminals
All Stations
Required Component(s)
SLIB(4)-U( ) ETU
SLIE(4)-U10 Unit
2 - 912
Electra Elite IPK II
Voice Mail Integration (Analog)