NEC Electra Elite IPK II Features And Specifications Manual page 172

Document Revision 1
Related Features
Abbreviated Dialing
One-Touch Calling
Electra Elite IPK II Wireless
Automatic Route Selection (ARS)
Conference, Voice Call
Privacy Release
Cordless II/Cordless Lite II Telephones
Call Arrival Keys (CAR)
Park
Station Message Detail Recording
T1 Trunking (with ANI/DNIS Compatibility)
Voice Mail
Programming
10-02-05 Location Setup - Trunk Access Code
For Electra Elite IPK II Wireless users, enter the trunk access code digits required to place an
outgoing call (8 digits maximum: 0~9,
information for incoming trunk calls to allow the call to dial out if allowed in 20-19-03.
Program 10-02-05 is only supported by telephone programming. PCPro and WebPro cannot edit
this option.
10-09-01 DTMF and Dial Tone Circuit Setup
Allocate the circuits (1~16 or 1~64) on the CPUII ETU for either DTMF receiving or dial tone
detection (0 = Common Use, 1 = Extension Only, 2 = Trunk Only).
11-15-03 Backup Data Save Service Code
This service code is used for back up the programmed data on the SRAM and Call History to the
Flash ROM. While saving the database, it may cause system lock up.
2 - 150
∗
, #). This is the code that will be added to the Caller ID
-- IMPORTANT --
Electra Elite IPK II
Caller ID