Power Lockout Procedure - Challenge CMT-130TC Service Manual

Warning Label Symbols
Warning labels are posted throughout the ma-
chine to indicate areas where physical injury
may occur. The following symbols are used:
Read the instruction manual.
The instruction manual should be
read and understood before operat-
ing this machine.
Do not operate with more than
one person!
One person only should operate
this machine at a time.
Cut / Crush Hazard!
Do not operate with covers re-
moved.
Do not disable safety devices.
Crush Hazard!
Do not operate with covers re-
moved.
Do not disable safety devices.
Crush / Entanglement Hazard!
Do not operate with covers or
guards removed.
Electrical Shock Hazard!
Disconnect power before removing
cover.
Electrical Shock Hazard!
Disconnect power before removing
cover.
CMT-130TC Book Trimmer

Power Lockout Procedure

For maximum safety while making ADJUST-
MENTS or REPAIRS to your machine, lock out
the main power disconnect switch. The switch
should be moved to the OFF position and a pad-
lock securely fastened through the loop. The
person adjusting or servicing the machine
should hold the key.
On/Off Switch
Main Power Disconnect
MAY 2019
ix Introduction