Repair/Adjustment Procedures; Contents; Introduction - Challenge CMT-130TC Service Manual

Contents

Title
REP 4.1 Cut Stick Replacement .......................... 4-2
REP 4.2 Knife Replacement ................................ 4-3
ADJ 4.3 Knife Depth Adjustment ......................... 4-6
ADJ 4.4 Lubrication ............................................. 4-7
ADJ 4.5 Accuracy Adjustment ............................. 4-8
ADJ 4.6 Squaring Adjustment ............................. 4-9
ADJ 4.7 Knife Down Switches Adjustment ........ 4-10
ADJ 4.8 Timing and Conveyor Belt Check/Repl. 4-12
ADJ 4.9 Conveyor Belt Tracking Adjustment ..... 4-14
REP 4.10 Slide Tape ......................................... 4-15
REP 4.11 Oil / Filter Change ............................. 4-16
REP 4.12 Air Filter Change ............................... 4-17
ADJ 4.13 Hydraulic System Pressure ............... 4-18
ADJ 4.14 Counterbalance Valve ....................... 4-19
ADJ 4.15 Knife Cushion Adjustment ................. 4-20
ADJ 4.16 Book Underside Air Lift ...................... 4-21
ADJ 4.17 Knife Gib Adjustment ......................... 4-22
ADJ 4.18 Knife Latch ......................................... 4-23
ADJ 4.19 Clamp Pressure Adjustment .............. 4-24
ADJ 4.20 Left Jog Pressure Adjustment ............ 4-25
ADJ 4.21 Gripper Clamp Pressure .................... 4-26
ADJ 4.22 Face Jog Pressure ............................. 4-27
REP 4.23 Main PWB Replacement ................... 4-28
REP 4.24 Console PWB Replacement .............. 4-29
REP 4.25 DI/HS PWB Replacement ................. 4-30
REP 4.26 Accessory PWB Replacement .......... 4-31
ADJ 4.27 Elevator Pusher Height ...................... 4-32
ADJ 4.28 Elevator Shelf Synchronization .......... 4-33

Introduction

The Repair/Adjustment Procedures section de-
tails the repair, replacement, and adjustment of
many parts within the CMT-130TC and its ac-
cessory options.
CMT-130TC Book Trimmer
Page
MAY 2019
4-1

4. Repair/Adjustment Procedures

4. Repair/Adjustment Procedures