Table of Contents
Advertisement
NOTICE
Service documentation is supplied to Challenge
external customers for informational purposes
only. Service documentation is intended for use
by certified, product-trained personnel only.
Challenge does not warrant or represent that
such documentation is complete, nor does Chal-
lenge represent or warrant that it will notify or
provide to such customer any future changes to
this documentation. Customer performed ser-
vice of equipment may affect the warranty of-
fered by Challenge with respect to such equip-
ment. If the customer services this equipment,
modules, components or parts thereof, the cus-
tomer releases Challenge from any and all liabil-
ity for the customer actions, and the customer
agrees to indemnify, defend and hold Challenge
harmless from any third party claims which arise
directly or indirectly from such service.
Prepared by:
The Challenge Machinery Company
6125 Norton Center Drive
Norton Shores, MI 49441 USA
Phone: 231.799.8484 Fax: 231.798.1275
ChallengeMachinery.com
©2019 by The Challenge Machinery Company.
All rights reserved.
Challenge® is a registered trademark of The
Challenge Machinery Company.
Introduction
The Challenge Machinery Company provides owner's manuals on its
products solely as a courtesy to its customers. See the information
below before using this manual.
These manuals are for reference only. These manuals include products which are noncurrent,
unsupported or no longer produced by The Challenge Machinery Company, and are provided
solely as an accommodation to our customers. By providing these manuals, The Challenge Ma-
chinery Company makes no representation or warranty as to the products, their current condition,
or their suitability or fitness for use in any particular application, which are the sole and independ-
ent responsibility of the product owner and user.
Older products may not comply with current safety procedures, guidelines or regulations,
and it is the product owner's and user's responsibility to evaluate the suitability and fitness
of the products in their current use and application. The Challenge Machinery Company
makes no representation, warranty or recommendation regarding any modifications which
may be required on non-current or unsupported products. The Challenge Machinery Com-
pany assumes no liability for any modification or alteration to any Challenge product, and
any such modification or alteration to any Challenge product is not authorized by The
Challenge Machinery Company. The availability of these manuals is solely for the purpose of
providing reference information for the products.
This manual may not be complete in all aspects of product maintenance and repair. All products
should be used only by qualified and properly trained personnel, following proper safety
procedures. All products should be regularly inspected and maintained, and their condition, ap-
plication and use should be periodically evaluated by qualified personnel. Only qualified and
properly trained technicians should perform maintenance, repair and replacement procedures.
Attempting these procedures without proper training may cause machine damage or operator
injury!
Products may be unsupported by The Challenge Machinery Company due to age or the unavail-
ability of parts from their original manufacturer. No parts or product support will be available to
repair or maintain unsupported products. Older products may not be UL listed (if the product does
not have a UL label it is not a listed product), and may not comply with applicable installation or
other regulations or requirements if relocated to a new facility. Many municipalities require a prod-
uct to be UL listed before an electrician will connect power to them. Often the cost of updating an
older product to comply with current safety regulations is greater than the value of the product.
MAY 2019
ii
Introduction
CMT-130TC Book Trimmer
Advertisement
Table of Contents
