Gp 6.16 Specifications - Challenge CMT-130TC Service Manual

GP 6.16 Specifications

WARNING
The CMT-130TC was designed specifically
for use with the Challenge infeed and exit ac-
cessories. If any other accessories are used,
it is the purchaser's responsibility to comply
with ANSI B65.4 Safety Standard for Three-
Knife Trimmers. Failure to comply with this
standard could result in personal injury or
death.
CAUTION
The CMT-130TC was specifically designed to
trim perfect bound books only. Trimming
other materials with the CMT-130TC may result
in safety hazards or damage to the machine.
For trimmable book sizes, see GP 6.17 Book
Size Chart.
Multiple Book Mode: Note that up to 3 books
may be stacked in multiple book mode. The to-
tal thickness is not to exceed 1-1/4 in. (32 mm).
Larger pile thicknesses may be cut, but the trim
may be less accurate and more out-of-square.
Always test before running books outside the
published specifications.
Sound Emission:
A-weighted sound pressure level measured in
an enclosed room at operator level (6 feet/183
cm):
Machine in idle state: 62 dB
Machine trimming: 75 dB
NOTE: Challenge reserves the right to make
changes to any product or specification without
notice and without incurring responsibility to ex-
isting units.
CMT-130TC Book Trimmer
Description
Max. start book
Min. start book, off-line (Hand-Feed)
Min. start book, near-line (Pile Feeder)
Min. start book, in-line (Tilt + Elevator)
Min. finish book
Max. finish book
Max. face (fore-edge) trim
Max. top (head) trim
Book thickness range
Min. Trim
CMT-130TC Basic Machine
Width
Depth
Height
Net Weight
Shipping Weight
Floor Loading
Optional Waste Bin Capacity
Oil Capacity
Air Consumption
Knife Re-grind
Memory
Time to change book size
Throughput
Electrical Requirements
60 Hz Machines
50 Hz Machines
56600TCA Tilt Infeed Conveyor (150 lb/68 kg net) (230 lb/105 kg ship) (5.62 PSI/.40 kg/cm
Height x Width x Depth
Compatible binder exit heights:
56421TCA Cooling Elevator (335 lb/152 kg net) (470 lb/214 kg ship) (11.86 PSI/.83 kg/cm
Height x Width x Depth
58500TCA Book Pile Feeder (370 lb/168 kg net) (420 lb/191 kg ship) (13.1 PSI/.92 kg/cm
Height x Width x Depth
59200 Standard Hand Feed Conveyor (40 lb/18.2 kg net) (80 lb/36.4 kg ship) (3.2 PSI/.22 kg/cm
Height x Width x Depth
56413B Long Hand Feed Conveyor (95 lb/43 kg net) (220 lb/100 kg ship) (7.6 PSI/.53 kg/cm
Height x Width x Depth
58000TCA Vertical Stacker (218 lb/99 kg net) (268 lb/122 kg ship) (7.7 PSI/.54 kg/cm
Height x Width x Depth
56420TCA Exit Conveyor (85 lb/39 kg net) (210 lb/95 kg ship) (6.76 PSI/.48 kg/cm
Height x Width x Depth
59093 Exit Ramp (6 lb/ 3 kg net)
Height x Width x Depth
Note: See Operator's Manual for floor space requirements of the CMT-130TC with various option configurations.
MAY 2019
6-19
US Units
13.00 (spine) x 9.50 in.
7.00 (spine) x 5.00 in.
7.00 (spine) x 5.00 in. (single book mode)
7.00 (spine) x 6.75 in. (multi-book mode)
7.00 (spine) x 6.75 in. (single book mode)
7.00 (spine) x 7.00 in. (multi-book mode)
5.82 (spine) x 4.00 in.
12.00 (spine) x 9.00 in.
5.50 in.
6.00 in.
0.10 to 2.00 in.
0.10 in.
52 in.
57 in.
60 in.
1,500 lb.
1,800 lb.
53 PSI
43 gal.
5 gal.
5 CFM @ 90 PSI
1/4 in.
99 jobs
10 sec. or less
up to 200 books/hr. (single book mode)
up to 500 books/hr. (multi-book mode)
60 Hz, AC, 3 phase, 208/230 Volts, 20 Amps (service size 30 Amps)
50 Hz, AC, 3 phase, 380/415 Volts, 16.5 Amps (service size 20 Amps)
50 Hz, AC, 3 phase, 200-208 Volts, 20 Amps (service size 30 Amps)
26 x 39 x 29 in.
17 to 26 in.
46 x 38 x 22 in.
54 x 21 x 57 in.
11 x 16 x 15 in.
42 x 35 x 13 in.
44 x 19 x 49 in.
2
39 x 47 x 13 in.
5 x 10 x 12 in.
Metric Units
330.2 (spine) x 241.3 mm
177.8 (spine) x 127.0 mm
177.8 (spine) x 127.0 mm
177.8 (spine) x 171.4 mm
177.8 (spine) x 171.4 mm
177.8 (spine) x 177.8 mm
147.8 (spine) x 101.6 mm
304.8 (spine) x 228.6 mm
139.7 mm
152.4 mm
2.5 to 50.8 mm
2.5 mm
132 cm
145 cm
152 cm
680 kg
816 kg
2
3.7 kg/cm
164 L
19 L
142 LPM @ 620 kPa
6.4 mm
2
load)
66 x 99 x 74 cm
43 to 66 cm
2
load)
117 x 97 x 56 cm
2
load)
137 x 53 x 145 cm
2
load)
28 x 41 x 38 cm
2
load)
107 x 89 x 33 cm
2
load)
112 x 48 x 124 cm
load)
99 x 120 x 33 cm
13 x 25 x 30 cm
6. General Procedures/Information