Installing An Os; Optional) Configuring The Boot From Iscsi Function For An Sp230 Nic - Huawei RH2288H V3 User Manual

RH2288H V3 Server
User Guide

5.8 Installing an OS

The RH2288H V3 supports a variety of OSs, including Windows, SUSE Linux
Enterprise Server (SLES), and Red Hat Enterprise Linux (RHEL). To query the OS
compatibility, use
The OS installation method varies according to the OS type. For details about the
installation procedure, see
5.9 (Optional) Configuring the Boot from iSCSI
Function for an SP230 NIC
An SP230 supports boot from PXE or iSCSI. Boot from PXE is enabled by default.
To boot from iSCSI, configure the boot from iSCSI function. Configure the boot
option as needed.
Before configuring the boot from iSCSI function, load the optional ROM for iSCSI.
For details, see "Upgrading the Intel X540 FlexIO card Firmware" in
Pro Rack Server Upgrade Guide
Issue 46 (2022-12-28)
b. Click the Mgmt Port tab.
The Mgmt Port screen is displayed.
c. Set the IP address of the management network port.
NO TE
The soft keyboard is displayed after you click the text box. You can use the soft keyboard to
set the IP address or click Cancel to return to the Mgmt Port screen.
Computing Product Compatibility
NO TE
Before you configure the server to boot from iSCSI, ensure that the OS of the server
supports the iSCSI protocol stack and has the iSCSI driver.
Copyright © Huawei Technologies Co., Ltd.
Huawei Server OS Installation Guide
.
5 Configuring the RH2288H V3
Checker.
.
FusionServer
142