Table of Contents
Advertisement
FusionServer Pro 2288H V5 Server
User Guide
Step 4 Select Boot Sequence and press Enter.
The Boot Sequence screen is displayed.
Step 5 Select the target boot device and press F5 or F6 to change the boot order.
l
l
----End
7.4.7.3 Setting PXE for a NIC
If a server is configured with multiple NICs, you can set the PXE function for the NICs on the
BIOS.
Procedure
Step 1 On the BIOS main screen, choose Advanced.
The Advanced screen is displayed.
Step 2 Select PXE Configuration and press Enter.
The PXE Configuration screen is displayed.
Issue 08 (2019-10-30)
l The default boot mode is UEFI.
l For some OSs, if the capacity of the drive or RAID array for installing the OS is greater than 2 TB,
use the UEFI boot mode. For details, see the release notes of the OS.
l If the OS is installed on an NVMe drive, the boot mode must be the UEFI boot.
l The UEFI boot mode supports more boot devices than the legacy boot mode. The UEFI boot mode
is recommended if a server is configured with multiple boot devices. If the legacy mode is set, some
devices may fail to boot. If the legacy mode has to be set, disable serial port redirection or NIC PXE
based on service requirements so that the OS can start. For details, see sections "Setting PXE for a
NIC" and "Setting Serial Port Redirection" in
Reference.
The default boot sequence is Hard Disk Drive > DVD-ROM Drive > PXE > Others.
Press F5 to move a boot option down.
Press F6 to move a boot option up.
The server boots in the order specified on this screen.
If multiple boot devices of the same type are configured for a server, you can set the system boot
sequence on the BIOS. For details about how to set the boot device, see
Platform BIOS Parameter
l Four on-board network ports can be displayed on the PXE screen. The default value is Enabled for
PXE1 and PXE3 and Disabled for other network ports.
l The I/O NIC ports are also displayed on the PXE Configuration screen.
Copyright © Huawei Technologies Co., Ltd.
Huawei Server Purley Platform BIOS Parameter
Reference.
7 Installation and Configuration
Huawei Server Purley
111
Advertisement
Table of Contents
