Setting Pxe For A Nic - Huawei FusionServer Pro 2288X V5 User Manual

Hide thumbs Also See for FusionServer Pro 2288X V5:
Table of Contents

Advertisement

FusionServer Pro 2288X V5 Server
User Guide
Step 4 Select Boot Sequence and press Enter.
The Boot Sequence screen is displayed.
Step 5 Select the target boot device and press F5 or F6 to change the boot order.
----End

7.4.7.3 Setting PXE for a NIC

If a server is configured with multiple NICs, you can set the PXE function for the
NICs on the BIOS.
Procedure
Step 1 On the BIOS main screen, choose Advanced.
The Advanced screen is displayed.
Step 2 Select PXE Configuration and press Enter.
The PXE Configuration screen is displayed.
Issue 04 (2020-06-05)
● The default boot mode is UEFI.
● For some OSs, if the capacity of the drive or RAID array for installing the OS is greater
than 2 TB, use the UEFI boot mode. For details, see the release notes of the OS.
● If the OS is installed on an NVMe drive, the boot mode must be the UEFI boot.
● The UEFI boot mode supports more boot devices than the legacy boot mode. The UEFI
boot mode is recommended if a server is configured with multiple boot devices. If the
legacy mode is set, some devices may fail to boot. If the legacy mode has to be set,
disable serial port redirection or NIC PXE based on service requirements so that the OS
can start. For details, see sections "Setting PXE for a NIC" and "Setting Serial Port
Redirection" in
Huawei Server Purley Platform BIOS Parameter
The default boot sequence is Hard Disk Drive > DVD-ROM Drive > PXE > Others.
Press F5 to move a boot option down.
Press F6 to move a boot option up.
The server boots in the order specified on this screen.
If multiple boot devices of the same type are configured for a server, you can set the system
boot sequence on the BIOS. For details about how to set the boot device, see
Server Purley Platform BIOS Parameter
● Two LOM ports are displayed on the PXE screen. The default value is Enabled for PXE1
and Disabled for other port.
● The PXE settings for the I/O card are also displayed.
Copyright © Huawei Technologies Co., Ltd.
7 Installation and Configuration
Reference.
Reference.
Huawei
107

Advertisement

Table of Contents
loading

This manual is also suitable for:

V100r005

Table of Contents