Internal Cabling; Internal Cabling For An M.2 Ssd Riser Card - Huawei RH2288H V3 User Manual

RH2288H V3 Server
User Guide
13
15
17
19
21
23
25
27
29
31
33
35

2.7 Internal Cabling

This section describes the internal cabling for an RH2288H V3 with different
configurations.

2.7.1 Internal Cabling for an M.2 SSD Riser Card

Internal Cabling for an M.2 SSD Riser Card on a Server with a DVD Drive
For an RH2288H V3 with a DVD drive, an M.2 SSD riser card can be configured
with only one M.2 SATA SSD card, which uses the external SATA2 port.
Issue 46 (2022-12-28)
BMC USB 2.0 connector (J34)
Rear hard disk backplane power
connector 1 (J28 PWR CONN2)
RAID controller card (J44)
Fan 4 connector (J130)
Fan 3 connector (J131)
Fan 1 connector (J133)
Hard disk backplane power
connector (J30 PWR CONN1)
Left mounting ear connector (J42)
SATA/SATADOM 2 (J38)
Rear disk backplane power
connector 2 (J29 PWR CONN3)
SoftRAID key (J51)
Dual-SD module (J57 SD BOARD)
NO TE
This section uses a RAID controller card on the mainboard as an example to describe how
to connect cables to the card. The method for connecting cables to a standard RAID
controller card is the same as that for connecting cables to a RAID controller card on the
mainboard.
Copyright © Huawei Technologies Co., Ltd.
14 System battery
16 Jumper (J36)
NOTE
COM_SW pins are used for
changing the serial port
direction, and CLR_BMC_PW pins
are used for restoring the default
iBMC settings.
18 LCD panel connector (J56)
20 Right mounting ear connector
(J43)
22 Fan 2 connector (J132)
24 Onboard USB 3.0 connector
(J53)
26 Hard disk backplane signal
connector (J1003)
28 SATA/SATADOM 1 (J37)
30 PSU backplane connector
(J31)
32 TPM (J35)
34 NC-SI connector (J1008)
36 Riser card 2 connector
(corresponding to CPU 2, J3-
J1005)
2 Overview
39