Connecting Mouse, Keyboard, And Vga Cables; Connecting Network Cables - Huawei FusionServer Pro 2288H V5 User Manual

FusionServer Pro 2288H V5 Server
User Guide

7.2.6.2 Connecting Mouse, Keyboard, and VGA Cables

The front and rear panels of the server provide DB15 VGA ports but no standard PS/2 port for
a keyboard or mouse.
You can connect a keyboard and mouse to the USB port on the front or rear panel based on
site installation conditions. There are two connection methods:
l
l
This section describes how to connect a keyboard and mouse using a USB-to-PS/2 cable and
connect a monitor using a VGA cable.
Procedure
Step 1 Connect the USB connector of the USB-to-PS/2 cable to a USB port on the front or rear panel
of the server.
Step 2 Connect the PS/2 connectors of the USB-to-PS/2 cable to the keyboard and mouse.
Step 3 Connect the DB15 connector of the VGA cable to the VGA port on the front or rear panel of
the server and tighten the two screws.
Step 4 Connect the other connector of the VGA cable to the VGA port on the monitor and tighten the
two screws.
Figure 7-14 Connecting a USB-to-PS/2 cable and VGA cable
----End

7.2.6.3 Connecting Network Cables

Before connecting or replacing a network cable, use a network cable tester to ensure that the
new network cable is functional.
Procedure
Step 1 Determine the model of the new network cable.
l
Issue 08 (2019-10-30)
Connect the keyboard and mouse to the USB ports.
Connect the keyboard and mouse using a USB-to-PS/2 cable.
Shielded cables are recommended.
Copyright © Huawei Technologies Co., Ltd.
7 Installation and Configuration
87