Connecting External Cables; Connecting Cables To A Mouse, Keyboard, And Vga Port - Huawei 5288 V3 V100R003 User Manual

5288 V3 Server
User Guide
Figure 3-20 CMA cabling
Step 6 Power on the 5288 V3.
----End

3.5 Connecting External Cables

This topic describes how to connect cables to the server.

3.5.1 Connecting Cables to a Mouse, Keyboard, and VGA Port

After powering on the server, connect cables to a mouse, keyboard, and VGA port to set the
basic input/output system (BIOS) and RAID, and log in to the operating system (OS).
The front and rear panels of the server provide DB15 video graphics array (VGA) ports but
have no standard PS/2 port for a keyboard or mouse. You can connect a keyboard and mouse
to the USB ports on the front or rear panel based on site installation conditions. The following
describe two connection methods:
l
l
Procedure
Step 1 Connect the USB connector on the PS/2 cable to the USB port on the front or rear panel of the
server.
Issue 26 (2018-11-19)
Connect a keyboard and mouse to the USB ports.
Connect a keyboard and mouse by using a USB-to-PS/2 cable.
Copyright © Huawei Technologies Co., Ltd.
3 Installing and Removing the 5288 V3
69