INVT Goodrive35 Series Operation Manual page 129

Goodrive35 Series Closed-loop Vector Control VFD
Functio
Name
n code
P18.12 pulse Z angle
Fault times of pulse
P18.13
Z
MSB of encoder
P18.14
pulse counting
LSB of encoder
P18.15
pulse counting
Pulse command
P18.17
frequency
Pulse command
P18.18
forward feedback
Position regulator
P18.19
output
Rotary transformer
P18.20
counting
Rotary transformer
P18.21
angle
P18.22 Pole angle
P18.23 State control word 3 Range: 0–65535
MSB of pulse
P18.24
reference counting
P18.25 LSB of pulse
Detailed instruction of parameters
the direction of pulse Z or the AB phase of encoder,
the stopping position will be same.
0: Forward
1: Reverse
Reserved
Range: 0–359.99
Reserved
Range: 0–65535
After power on, the value will be counted
continuously.
Range: 0–65535
After power on, the value will be counted
continuously.
Range: 0–65535
Pulse command (terminals A2 and B2) is converted
into setting frequency and keeps valid in pulse
position mode and pulse speed mode
Range: 0.0–400.0 Hz
Pulse command (terminals A2 and B2) is converted
into setting frequency and keeps valid in pulse
position mode and pulse speed mode
Range: 0.0–400.0 Hz
The position regulator output frequency in position
control.
Range: 0.00–400.00 Hz
Rotary transformer counting, 0–1024.
Range: 0–65535
The magnetic position angle from the rotary
transformer.
Range: 0.00–359.99
Current magnetic position.
Range: 0.00–359.99
After power on, the value will be counted
continuously.
Range: 0–65535
After power on, the value will be counted
122
Function parameters
Default Modif
value y
0.00
●
0
●
0 ●
0
●
0.0 Hz
●
0.0 Hz
●
0.00 Hz
●
0
●
0.00
●
0.00
●
0
●
0
●
0
●