INVT Goodrive35 Series Operation Manual page 72

Goodrive35 Series Closed-loop Vector Control VFD
Functio
Name
n code
Keypad setting
P03.12
torque
Torque reference
P03.13
filter time
Upper frequency of
P03.14 forward rotation in
vector control
Upper frequency of
P03.15 reverse rotation in
vector control
Keypad setting for
P03.16 upper frequency of
forward rotation
Keypad setting for
P03.17 upper frequency of
reverse rotation
Upper electromotion
P03.18
torque source
Upper brake torque
P03.19
source
Detailed instruction of parameters
Setting range: -300.0%–300.0% (rated current of the
motor)
0.000–10.000s
0: Keypad (P03.16 sets P03.14, P03.17 sets
P03.15)
1: AI1
2: AI2
3: AI3
4: Pulse frequency HDI setting upper-limit frequency
5: Multi-step setting upper-limit frequency
6: Modbus communication
frequency
7: PROFIBUS/CANopen communication setting
upper-limit frequency
8: Ethernet communication
frequency
Note: Setting method 0–8, 100% corresponds to the
maximum frequency
This function is used to set the upper limit of the
frequency. P03.16 determines the setting when
P03.14=1; P03.17 determines the setting when
P03.15=1.
Setting range: 0.00 Hz–P00.03 (max. output
frequency)
This function code
electromotion and brake torque upper-limit setting
source selection.
0: Keypad setting upper-limit frequency (P03.20 sets
P03.18, P03.21 sets P03.19)
1: AI1
2: AI2
3: AI3
4: HDI
5: Modbus communication
6: PROFIBUS/CANopen communication
7: Ethernet communication
Note: setting mode 1–7,100% corresponds to three
times of the motor current.
65
setting upper-limit
setting upper-limit
is used to select
Function parameters
Default Modif
value y
10.0%
○
0.100 s
○
0
○
0
○
50.00
○
Hz
50.00
○
Hz
the
0
○
0 ○