INVT Goodrive35 Series Operation Manual page 67

Goodrive35 Series Closed-loop Vector Control VFD
Functio
Name
n code
coefficient 4 for iron
core of AM1
P02.15 Rated power of SM 1 0.1–3000.0 kW
Rated frequency of
P02.16
SM 1
Number of poles
P02.17
pairs for SM 1
Rated voltage of SM
P02.18
1
Rated current of SM
P02.19
1
Stator resistor of SM
P02.20
1
Direct axis
P02.21
inductance of SM 1
Quadrature axis
P02.22
inductance of SM 1
Back EMF constant
P02.23
of SM 1
Detailed instruction of parameters
0.01 Hz–P00.03
output frequency)
1–128
0–1200 V
0.8–6000.0 A
0.001–65.535 Ω
0.01–6553.5 mH
0.01–655.35 mH
When P00.15=2, the set
value of P02.23 cannot be
60
Set the parameters of
controlled SM.
In order to ensure control
(max.
performance,
value of P02.15–P02.19
based on the nameplate
parameters of the motor.
Goodrive35 series VFD
provides
autotuning function. The
accurate
autotuning
proper parameter setup.
In order to ensure control
performance,
the motor based on the
motor which matches with
the VFD. If
between motor power and
the matching motor is too
large, the
performance of the VFD
will be deteriorated
greatly.
Note: P02.16–P02.19
can be initialized
resetting rated
power P02.15.
After motor
autotuning finishes, the
set value
P02.20–P02.22
updated automatically.
These parameters are the
basic parameters for high
performance
Function parameters
Default
value
Depend
on model
50.00
set the
Hz
2
Depend
on model
parameter
parameter
requires
configure
the gap
Depend
on model
control
by
motor
Depend
parameter
on model
Depend
of
on model
will be
Depend
on model
320
vector
Modif
y
◎
◎
◎
◎
◎
○
○
○
○