Product Nameplate - INVT Goodrive35 Series Operation Manual

Goodrive35 Series Closed-loop Vector Control VFD
Function
Position reference
Frequency division
Speed/position mode
Mountable method
Temperature of the
running environment
Average non-fault time 2 years (25° C ambient temperature)
Protective degree
Others

3.4 Product nameplate

Note: This is an example of the nameplate of standard Goodrive350 products. The CE/TUV/IP20
marking on the top right will be marked according to actual certification conditions.
Spindle stopping
Servo control
output
Encoder
Positioning
Pollution level
Cooling
Brake unit
EMC filter
Model: GD35-011G-4-H1
Power(Output): 11kW
Input: AC 3PH 380V(-15%)-440V(+10%) 32A 47Hz-63Hz
Output: AC 3PH 0V-Uinput 25A 0Hz-400Hz
S/N:
Shenzhen INVT electric Co., Ltd.
Figure 3-4 Product nameplate
For spindle positioning and control sequence
Internal 7 scale marks and 4 zero marks
External zero-position detection switch positioning
Encoder Z phase positioning
Pulse train reference: position control
Encoder frequency division output
(H1 and H2 VFDs)
Terminal shifting
C1 support 100 kHz, D1 support 500 kHz, H1 support
300 kHz and H2 support 400 kHz
Pulse Z and photoelectric switch positioning. Positioning
is accurate without overmodulation.
Wall, flange and floor mountable
-10–50° C, if temperature is above 40° C, derate 1% for
every additional 1° C.
IP20
Level 2
Air-cooling
Built-in for VFDs of 380 V (≤30 kW)
External for others
All products of the 380V series meet the IEC61800-3 C3
requirements.
External filters that
requirements are optional.
10
Product overview
Specification
meet the IEC61800-3
IP20
Made in China
C2