Setting Binding Margins - Canon imageRUNNER ADVANCE C5560i III User Manual

GutterGutter

Setting Binding Margins

● When the margin is set, images are shifted by the margin width and copied. An original whose image
extends all the way to the edges of the sheet may be partially cut off on the copy.
1
Place the original.
2
Press <Copy>.
3
Press <Options> on the Copy Basic Features screen.
Screen(P. 248)
4
Press <Gutter>.
5
Select the margin position.
● If <Gutter> is set with <N on 1> (
margin specified for the front side is applied to both sides. The margin specified for the back side is not
applied.
6
Enter the margin width.
● Press <Front Side> or <Back Side> and enter each margin width.
● If you enter a number smaller than 0, the margin is set on the opposite side of the position specified in step
4. Use this if you want to narrow the margin width when copying an original that already has margins.
● If you press <±>, the value switches between <-> and <+>.
Copying
You can make binding margins for stapling or punching holes. You can set binding
margins on the front side and back side of pages individually.
Placing Originals(P. 109)
<Home> Screen(P. 141)
Copying Multiple Originals onto One Sheet (N on 1)(P. 276) ), the
Copy Basic Features
305
4XR3-04U