Canon imageRUNNER ADVANCE C5560i III User Manual page 300

5
Select pages for the copy sample and press <OK>.
● If you want to copy all of the pages, select <All Pages>.
● To copy specific pages, select <Specified Pages>. Enter the pages by pressing <Start Page> or <End Page>.
If you select <All Pages>
● If you select <All Pages>, the machine's counter counts the sample set as a copy.
If you select <Specified Pages>
● Settings such as finishing and booklet are not performed.
● Specify the pages based on the output page numbers. For example, if the number of pages of document is
10 and you copy with the 2 on 1 setting (
(P. 276) ), the number of finished pages becomes 5. If you want to copy the seventh to tenth pages of the
original, specify the fourth page for <Start Page> and the fifth page for <End Page>.
6
Press to scan the originals, and press <Start Copying>.
➠
The copy sample is printed. Check the result.
If there is no problem with the copy result
Press <Start Printing> to print the number of copies you specified. If you selected <All Pages> in step 5, the
number of copies minus one is printed. If you select <Specified Pages> in step 5, the total number of copies is
printed.
If you want to change settings
Press <Change Settings> to change the settings. <Copy Sample> is displayed after the settings are changed.
Copy a sample again.
Print & Check
Copying
Copying Multiple Originals onto One Sheet (N on 1)
286