Copying Separately Scanned Originals Together (Job Build) - Canon imageRUNNER ADVANCE C5560i III User Manual

Job BuildJob Build
Copying Separately Scanned Originals Together (Job
Build)
1
Place the original.
2
Press <Copy>.
3
Press <Options> on the Copy Basic Features screen.
Screen(P. 248)
4
Press <Job Build>
5
Press to scan the originals.
➠
When scanning is complete, the screen appears prompting you to scan the next original.
6
Place the next original and press
● Repeat this step until you finish scanning all of the originals.
● To change the scan settings, press <Change Settings>.
● The following functions can be used in <Change Settings>: You need to set the necessary scan settings in
advance, since you cannot change the other functions during the Job Build mode.
- <Select Color>
- <Copy Ratio>
- <2-Sided Original>
- <Density>
- <Original Type>
● If you specify the <N on 1 > mode together with the Job Build mode, you cannot change <Select Color>,
<Copy Ratio>, and <Density> in <Change Settings>.
7
Press <Start Copying>.
Copying
Even if you have too many originals to be placed in the feeder at once, you can scan
the originals separately and copy them as a batch of documents. Originals scanned
with both the feeder and the platen glass also can be copied at one time.
Placing Originals(P. 109)
<Home> Screen(P. 141)
<Close>.
Copy Basic Features
to scan the original.
283
4XR3-04A