Canon imageRUNNER ADVANCE C5560i III User Manual page 307

Hide thumbs Also See for imageRUNNER ADVANCE C5560i III:

Table of Contents

To staple in two locations in the side of the page, select <Double> for the staple position.

To staple in the section where the paper is folded in half, select <Saddle Stitch>. Depending on the option,

you can attach a cover or change the folding position. When trimming the edges of the output sheets, you

can adjust the trimming position.

Depending on the option, you can bind the paper by crimping without using staples. Select <Staple-Free>

and specify the binding position. This is convenient for when you want to save staples or temporarily bind the

paper, as you can easily tear off the paper by rubbing the crimped part.

Copying starts.

Depending on finishing functions, the installation of optional devices is needed.

Equipment(P. 1516)

Depending on the paper type, you cannot use finishing functions.

You can specify the procedure to perform when there are too many sheets to staple at once.

When Too Many Sheets to Staple>(P. 1078)

<Saddle Stitch> can be set only if 2-Sided Copying is set.

When configuring settings in <Access Stored Files>

The finishing function can be used only when you are printing a PDF/XPS file or a file stored in the Mail Box.

Hardware Specifications(P. 1485)

Chapters

Table of Contents