Setting Sounds - Canon imageRUNNER ADVANCE C5560i III User Manual

Setting Sounds

You can adjust the volume of sounds produced by the machine when sending/receiving a fax. In addition to setting
sounds for faxes, you can specify whether or not confirmation and warning sounds are produced.
Adjusting the Volume for Sending/Receiving Faxes(P. 213)
Setting the Confirmation Sound and Warning Sound(P. 214)
● This setting works only for Line 1 (the standard line). Use this setting with Line 1 (the standard line).
Adjusting the Volume for Sending/Receiving Faxes
You can adjust the volume of sounds produced for fax functions, such as the communication and cancellation sounds
during fax transmission, or the sound to indicate that a received fax is finished printing. You can also set whether or
not a sound is produced for the Fax Memory Lock sending/receiving result.
1
Press the Volume Settings key.
2
Adjust the volume or specify the setting, and press <OK>.
<Alarm Volume>
Adjust the volume of sound that is produced when fax transmission is canceled, or when a received fax is
finished printing. If you do not want a sound to be produced, press
<Monitor Volume>
Adjust the volume of sound that is produced when sending a fax. If you do not want a sound to be
produced, press
<Memory RX/TX End Tone>
Specify whether or not a sound is produced when Fax Memory Lock sending/receiving completes without
an error. Saving Received Documents in the Machine (Memory Reception)(P. 433)
<Memory RX/TX Error Tone>
Specify whether or not a sound is produced when Fax Memory Lock sending/receiving completes with an
error. Saving Received Documents in the Machine (Memory Reception)(P. 433)
Basic Operations
Control Panel(P. 103)
all the way to the left.
213
all the way to the left.
4XR3-039