Canon imageRUNNER ADVANCE C5560i III User Manual page 265

<Auto (Color/B&W)>
Automatically detects the color of the original. Color pages are copied in four colors (CMYK), and black and
white pages are copied in black (K) only.
<Full Color>
Copies in four colors (CMYK), regardless of the color of the original.
<Black & White>
Copies in black (K) only, regardless of the color of the original.
<Two Colors>
Copies in black and the color you specify. Select <Red>, <Green>, <Blue>, <Yellow>, <Magenta>, or <Cyan>.
● You can set whether to replace a chromatic color other than the specified color (or approximate color) with
black or the specified color.
<Single Color>
Copies with the color you specify only. Select <Red>, <Green>, <Blue>, <Yellow>, <Magenta>, or <Cyan>.
Example: If you copy with red
3
Press <OK>.
● Depending on the state of the color original, it may be detected as black and white when scanned, even if
you set <Auto (Color/B&W)>. To avoid this, set the color mode to <Full Color>.
● When the Auto (Color/B&W) mode is set, black-and-white copies are output at the same speed as colour
copies.
● If a black-and-white document is copied in the <Full Color>, <Single Color>, or <Two Colors> mode, it is
counted as a color copy.
Copying
<Conversion Color by Specific Color for Two Colors Print>(P. 1079)
251