Canon imageRUNNER ADVANCE C5560i III User Manual page 352

● Touch two diagonally opposite points to specify a rectangle area with those points as reference points.
Specify an area that encloses the area you want to copy in a rectangle.
Two opposing points to enter
The area to copy
● To cancel a point you have specified, press <Delete Point>. To delete the area after you have specified it,
press <Clear Area>.
● If it is difficult to specify the area because the image displayed on the preview screen is small, press <100%
> to enlarge it. You can press
want to display.
● If it is difficult to specify an area because the space between text or images is small, press <Fine Adjust> to
perform fine adjustment of the area. You can move the position of an individual point by selecting the
desired <Move Point> button after selecting one of the corner points by pressing the <Select Point>.
● You can specify up to four areas. After specifying the first area, press
specify the second and subsequent areas.
● If the area of a specified area is too small, the color information of the original may not be correctly detected,
and the copy may be output in black and white.
8
Press <Framing>
If you press <Framing>, the specified areas are copied.
If you press <Blanking>, the contents outside the specified areas are copied.
Copying
, , , or
<Preview>.
338
after selecting the zoom ratio to move to the location you
, , or to