Canon imageRUNNER ADVANCE C5560i III User Manual page 270

● If <Paper Drawer Auto Selection On/Off> is set to <Off> for a particular paper source, you cannot
make copies on paper loaded in that paper source when <Select Paper> is set to <Auto>.
Drawer Auto Selection On/Off>(P. 1076)
Also, even if <Paper Drawer Auto Selection On/Off> is set to <On> for a paper source, depending on
the paper type, automatic paper selection may not be performed. To use paper loaded in a paper
drawer for which automatic paper selection cannot be performed, manually specify the paper drawer.
● Be sure to correctly set the paper type. If the type of paper is not set correctly, it may adversely affect image
quality. Moreover, the fixing unit may become dirty, or the paper could jam, and a service repair may be
needed.
● Take care when copying an original with an image that extends all the way to the edges. If you copy on the
same size paper, the periphery of the original image may be cut off slightly on the copy. For more
information on how much may be cut off, see
2-Sided Copying
● Place the original in a proper orientation as shown in the illustrations below.
● Originals of heavy or thin paper cannot be placed in the feeder. Place the original on the platen glass.
In this case, place the original in a proper orientation as shown in the illustrations below.
● When making 2-sided copies, functions of some settings such as the paper size and type are limited.
For more information, see
Copying
Hardware Specifications(P. 1485) .
You can copy 1-sided originals on both sides of the paper. You can also copy a 2-
sided original on both sides of the paper, or on two separate sheets.
Copying 1-Sided to 2-Sided
Copying 2-Sided to 2-Sided
Copying 2-Sided to 1-Sided
Hardware Specifications(P. 1485) .
256
<Paper