●
Advanced Box WebDAV server: Access via the HEAD method is always prohibited.
●
To send to the Advanced Box of a machine from the same machine, it is recommended that you
specify a loopback address. If you specify a loopback address, you can use the following functions:
- You can use the URI sending function to notify a user via e-mail that a file has been saved.
Notifying You by E-Mail of the Completion of Sending/Saving(P. 543)
- Even if <Prohibit Writing from External> is set to <On>, users with the Administrator privileges can
store in the Advanced Box.
●
When sending using a loopback address, enter <Host Name> as follows.
Protocol
<Windows (SMB)>
<WebDAV>
8
Press <OK>
<Close>.
●
When destinations are managed by access numbers, enter the access number (
Destinations Registered in the Address Book(P. 755) ) after pressing <Next> in step 8.
●
If you try to send to a file server/Advanced Box in which <Confirm Before Sending> is set to <On>, a screen
appears prompting you to enter a user name and password. In this case, enter the previously set
password. If you want to register a file server/Advanced Box in a group address, set <Confirm Before
Sending> to <Off>. You cannot send to a group address including a file server/Advanced Box in which
<Confirm Before Sending> is set to <On>.
Basic Operations
<IP Address Display Settings>(P. 1046)
To save to the Shared Space of
the Advanced Box:
●
Using the IPv4 format:
\\127.0.0.1\share
●
Using an IP address (IPv6
format):
\\[::1]\share
●
Using a host name:
\\localhost\share
●
Using the IPv4 format:
http://127.0.0.1/share
●
Using an IP address (IPv6
When TLS
format):
is disabled
http://[::1]/share
●
Using a host name:
http://localhost/share
●
Using the IPv4 format:
https://127.0.0.1/share
●
Using an IP address (IPv6
When TLS
format):
is enabled
https://[::1]/share
●
Using a host name:
https://localhost/share
231
To save to the Personal Space of
the Advanced Box:
●
Using the IPv4 format:
\\127.0.0.1\users
●
Using an IP address (IPv6
format):
\\[::1]\users
●
Using a host name:
\\localhost\users
●
Using the IPv4 format:
http://127.0.0.1/users
●
Using an IP address (IPv6
format):
http://[::1]/users
●
Using a host name:
http://localhost/users
●
Using the IPv4 format:
https://127.0.0.1/users
●
Using an IP address (IPv6
format):
https://[::1]/users
●
Using a host name:
https://localhost/users
Restricting Access to