Copying Different Size Originals Together (Different Size Originals) - Canon imageRUNNER ADVANCE C5560i III User Manual

Different Size OriginalsDifferent Size Originals
Copying Different Size Originals Together (Different
Size Originals)
● You are limited to certain combinations of original sizes for scanning. Scanning with an improper
combination may cause damage to the originals or paper jams.
● Do not place the originals together that are of different weights or paper types, as this may cause damage
to the originals or paper jams.
● You cannot combine all of the following modes at the same time.
- <Different Size Originals>
- <Shift>
- <Select Paper>:<Auto>
1
Place the originals in the feeder.
● To place the originals with the same width, align the top and bottom edges of the originals with the edges of
the feeder as shown in the figure below. To place the originals with different widths, align the top edges of all
of the originals with the back edge of the feeder.
For originals with the same widths
2
Press <Copy>.
3
Press <Options> on the Copy Basic Features screen.
Screen(P. 248)
4
Press <Different Size Originals>.
Copying
You can place different size originals in the feeder and scan them at one time. You
can eliminate the need to select paper and place the original again.
Placing Originals(P. 109)
For originals with different widths
<Home> Screen(P. 141)
Feeder(P. 1489)
Copy Basic Features
281
4XR3-049