Parameters - Siemens SINAMICS G130 Operating Instructions Manual

Converter built-in units 75 kw-800 kw

Hide thumbs Also See for SINAMICS G130:

Table of Contents

Functions, monitoring, and protective functions

9.3 Extended functions

Parameters

Bypass function

Synchronization

Flying restart operating mode

Bypass configuration

CO/BO: Bypass control/status word

Bypass dead time

Debypass delay time

Bypass delay time

Bypass speed threshold

BI: Bypass control command

Bypass changeover source configuration

BI: Bypass feedback signal synchronization completed

BI: Bypass switch feedback signal

BI: Bypass switch monitoring time

Sync–supply–drive activation

Sync–supply–drive drive object number

BI: Sync–supply–drive enable

CO/BO: Sync–supply–drive control word

CO: Sync–supply–drive target frequency

CO: Sync–supply–drive frequency difference

Sync–supply–drive frequency difference threshold

CO: Sync–supply–drive phase difference

Sync–supply–drive phase setpoint

Sync–supply–drive frequency limitation

CO: Sync–supply–drive correction frequency

Sync–supply–drive phase synchronism threshold

CO: Sync–supply–drive voltage difference

Sync–supply–drive voltage difference threshold

CO/BO: Sync–supply–drive status word

Inverter chassis units

Operating Instructions, 07/2016, A5E00331449A